Agilent Technologies HDMP-3001 - Manual (Page 60)

60
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Bit name Reserved TX_G1 [2:0] Reserved Reserved Reserved TX_PAIS
R/W — R/W — — — R/W
Value 0 0 0 0 0 0 0 0
after
reset
ADDR=0x0F7: POH Error Generation
Bit 7: Reserved
Bits 6-4: TX_G1[2:0] When PRDI_AUTO = 0, the values transmitted in bits 7-5 of G1 are taken from
these three bits.
Bits 3-1: Reserved
Bit 0: TX_PAIS: If 1, the TOH/SOH is normally generated except that the pointer bytes H1, H2 and H3
in row 4(as well as all SPE/VC bytes) are transmitted as all ones. If 0, the payload will be generated
normally.
Bits 7-0: TX_C2[7:0]: Transmit C2 byte is generated from this register. When in LAPS mode, value is set
to 0x18. When in GFP mode, the value is set to 0x1B.
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Bit name TX_C2 [7:0]
R/W R/W
Value 0x18
after
reset
ADDR=0x0F8: Transmit C2 Byte