Agilent Technologies HDMP-3001 - Manual (Page 70)

70
ADDR=0x122: Receive Pointer Interpreter Mask
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Bit name Reserved Reserved Reserved Reserved Reserved Reserved RX_LOP_D RX_PAIS_
_MASK D_MASK
R/W — — — — — — R/W R/W
Value 0 0 0 0 0 0 1 1
after
reset
Bits 7-2: Reserved
Bit 1: RX_LOP_D_MASK: RX_LOP delta bit mask
Bit 0: RX_PAIS_D_MASK: RX_PAIS delta bit mask
These bits are used to enable/disable status reporting of the corresponding event bits. If set, the reporting
status of the corresponding bit in the event register is disabled.
ADDR=0x126: Receive Pointer Interpreter Delta
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Bit name Reserved Reserved Reserved Reserved Reserved Reserved RX_LOP_D RX_PAIS_
D
R/W — — — — — — W1C W1C
Value 0 0 0 0 0 0 0 0
after
reset
Bits 7-2: Reserved
Bit 1: RX_LOP_D: RX_LOP delta bit
Bit 0: RX_PAIS_D: RX_PAIS delta bit
These bits are set if a change in state of the corresponding event bit occurs. They are cleared by writing a
one to them.