Transmille 1000-Series - Manual (Page 9)

1000 SERIES OPERATION MANUAL
TRANSMILLE LTD. Version 1.30 Page 9
Positioning the Calibrator
The 1000 series calibrator is available in a variety of different casings for use on
site, on a bench or in a rack.
Care should be taken when positioning the calibrator to ensure that items are not
placed against the cooling vents. Placing items against the cooling vents will affect
the performance of the calibrator and reduce the amount of time that the 10A output
will operate for before reaching thermal cut-out conditions (see Page 70)
When considering placement of the 1000A (in ruggedized casing), ensure that the
calibrator is placed on a flat, stable surface.
For bench-top use, the 1000B (bench top casing) is fitted with 4 non-slip feet. The
front pair of feet are fitted with moveable ‘arms’ that can be positioned to raise the
front of the calibrator to a more ergonomic position.
Moveable ‘arms’ attached to
front pair of feet