Transmille 1000-Series - Manual (Page 25)

1000 SERIES OPERATION MANUAL
TRANSMILLE LTD. Version 1.30 Page 25
9 Pin Adapter Interface Connector.
To expand the 1000 Series calibrators, an adapter interface is provided on the front
panel. This allows for connection to external adapters used for extending calibration
capability, e.g. Pressure measurement etc.
Incorporates a yellow LED to indicate when the adapter interface is active.
The pins connections are as follows:
Pin 1 – +15V
Pin 2 – Digital ground
Pin 3 – Strobe
Pin 4 – Data
Pin 5 – Select
Pin 6 – -15V
Pin 7 – Analogue ground
Pin 8 – Output
Pin 9 – Input