Transmille 1000-Series - Manual (Page 28)

1000 SERIES OPERATION MANUAL
TRANSMILLE LTD. Version 1.30 Page 28
Setup Menu
To configure the 1000 series calibrator, a setup menu is provided. This allows users
to configure options, i.e. the Calibration Password.
Using the arrows keys (as described on page 22), move the cursor to the desired
function and press the ‘Select’ soft key or press the enter button.
Function Name Description
Beeper This menu item allows the beeper to be
turned on or off. With the beeper off the
unit will not emit any noises for key
presses, however beeps will STILL be
emitted for HV ramps and errors.
Password This function prompts the user to enter
the calibration password. After entering
the correct password the calibrator will
be in calibration mode.
Another function of this key, once
already in calibration mode, is to edit the
system password to a new password.
Adapters This menu item allows the user to edit
the displayed unit for pressure adapters
that have been stored in the calibrator
Range Hold This function enables a ‘Range Hold’
function on the calibrator, enabling
outputs that would not normally be
available from the range to be output, i.e.
50mV from the 1V range