Ac current commands, Urrent, Ommands – Transmille 1000-Series User Manual
Page 80: Function range command, Standby mode, Output, Ac frequency
1000 SERIES OPERATION MANUAL
TRANSMILLE LTD.
Version 1.30
Page 80
AC Current Commands
Function
Range
Command
AC Current
100uA
R17
1mA
R18
10mA
R19
100mA
R20
1A
R21
10A
R22
Standby Mode
Standby ON
S1
Standby OFF
S0
Output
Set Output
O (not zero)
AC Frequency
Fxxxxx
E.G. 10kHz = F10000
The AC current section consists of a set of range commands which are used in
conjunction with the standby and output command. To enable a AC current to be set
and an output assigned, the following command sequence should be
used:
For example, to get 10mA @ 1 kHz AC with the output switched on, the command
is:
R19/O10/F1000/S0
R19 = 10mA Range (as detailed in the table above)
O10 = 10mA Output
F1000 = 1 kHz Frequency
S0 = Standby OFF (i.e. output switched ON)