Transmille 1000-Series User Manual
Page 60
1000 SERIES OPERATION MANUAL
TRANSMILLE LTD.
Version 1.30
Page 60
14) The display will now indicate the value that has been entered below the
currently set output
15) Press
. The new value will replace the existing output in the middle
of the display
16) Press
to activate the calibrator output. The LED next to the
key will
light up, as well as the terminal indicator; indicating that the output is active.
Note : When setting AC Frequencies, at high frequencies ( >300Hz) the coil will emit
a high frequency tone. This is normal
For further information on operation of the EA002, please refer to the EA002 manual
and extended specifications available from