Transmille 1000-Series - Manual (Page 41)

1000 SERIES OPERATION MANUAL
TRANSMILLE LTD. Version 1.30 Page 41
9) Press . The new voltage will replace the existing output in the middle
of the display
10) Press the numeric and decimal point keys to enter the required frequency,
e.g. 1.234
11) Press the multiplier key (if required) e.g.
12) Press
13) The display will now indicate the value that has been entered below the
currently set output
14) Press The new value will replace the currently set frequency
15) Press to activate the calibrator output. The LED next to the key will
light up, as well as the terminal indicator; indicating that the output is active.