Transmille 1000-Series - Manual (Page 78)

1000 SERIES OPERATION MANUAL
TRANSMILLE LTD. Version 1.30 Page 78
DC Current Commands
Function Range Command
DC Current 100uA R6
1mA R7
10mA R8
100mA R9
1A R10
10A R11
Standby Mode
Standby ON S1
Standby OFF S0
Output
Set Output O (not zero)
The DC current section consists of a set of range commands which are used in
conjunction with the standby and output command. To enable a DC current to be set
and an output assigned, the following command sequence should be used :
//
For example, to get 10mA DC with the output switched on, the command is :
R8/O10/S0
R8 = 10mA Range (as detailed in the table above)
O10 = 10mA Output
S0 = Standby OFF (i.e. output switched ON)
= Carriage Return (ASCII character 13)