Transmille 1000-Series - Manual (Page 57)

1000 SERIES OPERATION MANUAL
TRANSMILLE LTD. Version 1.30 Page 57
9) The display will now indicate the value that has been entered below the
currently set output
10) Press . The new value will replace the existing output in the middle
of the display
11) Press to activate the calibrator output. The LED next to the key will
light up, as well as the terminal indicator; indicating that the output is active
To adjust the value, either type in a new value using the keyboard, for example
100ºC, or deviate the output using the cursor keys or the digital control as explained
on page 35
The output can also be changed by using the and . Using these keys will
either multiply or divide the currently set value by a factor of 10.