NORD Drivesystems BU0290 - Manual (Page 69)

8 Additional information
BU 0290 GB-4312 Subject to technical amendments 69
8.2.3.2 M12 round plug connector (cable connector)
The following plug connectors are recommended by Getriebebau NORD GmbH.
M12 connector
D coded
Supplier Designation
Part no.:
straight angled
Franz Binder GmbH Plug connector M12, 6..8mm, 4-
pin, screwed, IP67
99 3729 810 04 99 3729 820 04
Phoenix Contact Plug connector M12, 6..8mm, 4-
pin, screwed, IP67
1521258 Not applicable
Phoenix Contact Ethernet cable plug connector
(straight) to open ends, M12,
CAT5e, 4-pin, AWG24 flex.,
shielded 2m 1524006
5m 1524019
10m 1524022
15m 1524035
No details
Phoenix Contact Ethernet cable plug connector
(straight) to plug connector
(straight), M12, CAT5e, 4-pin,
AWG24 flex., shielded 0.5m 1523078
2m 1521533
5m 1524051
15m 1524077
No details
Phoenix Contact Ethernet cable plug connector
(RJ45) to plug connector
(straight), M12, CAT5e, 4-pin,
AWG26 flex., shielded 0.5m 1657562
1.0m 1657575
2.0m 1657588
5m 1657591
No details
NOTE
For preference, pre-assembled PROFINET bus cables and connection components should
be used.
For certain applications, vibration-proof round plug connectors should be used.
4
3
2
1