NORD Drivesystems BU0290 - Manual (Page 3)

Table of Contents
BU 0290 GB-4312 3
Documentation
Designation: BU 0290 GB
Part No.: 607 29 01
Device series: PROFINET IO for SK 200E
Device types: SK TU4-PNT(-C) with SK TI4-TU BUS
Version list
Designation of
previous issues Software
Version Remarks
BU 0290 GB, October 2012
Part No. 607 2902 / 4312
V 1.1 R0 First issue
Publisher
Getriebebau NORD GmbH & Co. KG
Rudolf-Diesel-Str. 1

D-22941 Bargteheide

http://www.nord.com/
Tel.: +49 (0) 45 32 / 289-0

Fax +49 (0) 45 32 / 289-2555
Intended use of the frequency inverter
Compliance with the operating instructions is essential for fault-free operation and the
acceptance of any warranty claims. These operating instructions must be read before
working with the device!
These operating instructions contain important information about servicing. They must
therefore be kept close to the device.
The field bus technology options described here are intended for use in combination with SK
200 E series frequency inverters. Use of SK TU4-EPNT(-C) technology units is also possible
with the SK 500E series. The use of these technology options with other devices is not
permitted and can lead to their destruction.
The field bus technology options and the associated frequency inverters are devices for fixed
installation on motors or in equipment close to the motor to be operated. All details
regarding technical data and permissible conditions at the installation site must be
complied with.
Commissioning (commencement of the intended use) is not permitted until it has been ensured
that the machine complies with the EMC Directive 2004/108/EEC and that the conformity of
the end product meets the Machinery Directive 2006/42/EEC (observe EN 60204).

Getriebebau NORD GmbH & Co. KG, 2012
NOTE
This supplementary operating manual is only valid in conjunction with the operating manual
supplied for the respective frequency inverter (Manual BU0200).