NORD Drivesystems B1000 - Manual (Page 750)

www.nord.com G748 G1000 – Subject to Change Without Notice
BRAKES
Method Operation
Start - Fast release (Overexcitation)
Stop - Fast stop (DC-Switching)
GPE type - External DC-Switching
Terminal 3 & 4 - Contact or IR-relay
Method Operation
Start - Standard Release
Stop - Very Fast stop (Reduced power Hold)
GPE type - External DC-Switching
Terminal 3 & 4 - Contact or IR-relay
35
___ = Braking Method
40
___ = Braking Method
Connections
Requirements
• Brake must be powered from the motor’s terminal block (not seperately powered)
• Motor must be a single speed and should not be powered by a frequency inverter or soft starter.
CAUTIONS
GPE Rectifi er for External DC-Switching with IR Relay