NORD Drivesystems B1000 - Manual (Page 571)

www.nord.com D569
DI
MENSI
ONS
G1000 – Subject to Change Without Notice
Hollow Shaft
Dimensions
KEY
ADH UYH
UH UH DH
LH LH
Hollow Shaft Foot Mount Dimensions
(AX)
TYPE UH DIAMETER TOLERANCE ADH LH DH UYH KEY SIZE
w x h x l
KEY QTY
SK 92072 AX 0.750* +0.0010 / -0.0000 4.57 0.98 1.38 0.84 3/16 x 3/16 x 2 2
0.500 +0.0010 / -0.0000 4.57 0.98 1.38 0.56 1/8 x 1/8 x 7/8 2
25mm +0.021 / -0.000mm 116mm 30mm 35mm 28.3mm 8 X 7 x 25mm 2
SK 92172 AX 0.750 +0.0010 / -0.0000 5.28 1.18 1.38 0.84 3/16 x 3/16 x 2 2
20mm +0.021 / -0.000mm 134 40 35 22.8 6 x 6 x 50mm 2
SK 92372 AX 1.1875* +0.0010 / -0.0000 6.46 1.97 1.97 1.30 1/4 x 1/4 x 2-1/4 2
1.250 +0.0010 / -0.0000 6.46 1.97 1.97 1.37 1/4 x 1/4 x 2-1/4 2
1.4375 +0.0010 / -0.0000 6.46 1.97 1.97 1.61 3/8 x 3/8 x 2-1/2 2
30mm +0.021 / -0.000mm 164mm 50mm 50mm 33.3mm 8 x 7 x 60mm 2
SK 92672 AX 1.375* +0.0010 / -0.0000 6.69 2.36 2.17 1.52 5/16 x 5/16 x 2-1/2 2
1.4375 +0.0010 / -0.0000 6.69 2.36 2.17 1.61 3/8 x 3/8 x 2-1/2 2
1.500 +0.0010 / -0.0000 6.69 2.36 2.17 1.67 3/8 x 3/8 x 2-1/2 2
35mm +0.025 / -0.000mm 170mm 60mm 55mm 38.3mm 10 x 8 x 60mm 2
SK 92772 AX 1.500* +0.0010 / -0.0000 7.56 2.36 2.17 1.67 3/8 x 3/8 x 2-1/4 2
1.4375 +0.0010 / -0.0000 7.56 2.36 2.17 1.61 3/8 x 3/8 x 2-1/4 2
40mm +0.025 / -0.000mm 192mm 60mm 55mm 43.3mm 12 x 8 x 60mm 2
* standard size
• Dimensions are in inches unless otherwise noted.
• For shaft sizes not shown, consult NORD.