General information – NORD Drivesystems B1000 User Manual
Page 731
www.nord.com
G729
General
Information
BRAKES
G1000 – Subject to Change Without Notice
Brake Nomenclature
BRE – –
Brake
Brake Size/Torque Rating
Additional Brake Options
Ordering Examples
BRE 100 HL RG IR
Brake
100 Nm Brake Torque
Hand Release Lever
Corrosion Protected Brake
Current Sensing Relay
Brake, 100 Nm with a hand release lever, corrosion
protected brake, and a current sensing relay.
BRE 40 FHL SR
Brake
40 Nm Brake Torque
Locking Hand Release Lever
Dust & Corrosion Prot. Brake
Brake, 40 Nm with a locking hand release lever and
dust & corrosion protected brake.
Brake Options
Abbreviation
Description
Page
ADJ
Torque Adjustment - Brake torque may be adjusted at the factory
731
BSH
Brake Heating/BiÀ lar Coil - Provides a seperate coil for heating to avoid condensation
737
DBR
Double Brake (2xBRE) - Double brakes are used for redundancy and additional safety
740
FBR
Brass Foil - Provides a brass foil in the brake air-gap to provide faster braking times
738
FHL
Locking Hand Release Lever - Lockable manual hand release lever
737
HL
Hand Release Lever - Manual hand release lever
737
HLH
Hand Release Lever with Hole - Hand lever with 5.5mm hole
737
IP66
IP66 Brake Enclosure - Brake with IP66 enclosure
737
IR
Current Sensing Relay - Fast brake engagement (stopping) without external control equipment
739
MIK
Micro-Switch - Brake fi tted with a micro-switch for sensing the brake state (released or engaged)
738
NRB1
Quiet Brake Release - An o-ring is placed between the coil body and the armature plate for noise reduction
738
NRB2
Quiet Brake Motor Operation - An o-ring is placed between the carrier hub & the armature plate
to prevent clattering.
738
RG
Corrosion Protected Brake - Corrosion protected brake
737
SR
Dust & Corrosion Protected Brake - Dust & corrosion protected brake
737
RectiÀ er Options
Abbreviation
Description
Page
RectiÀ ers
Most NORD brakes are provided with a rectifi er that converts AC voltage to DC voltage. Rectifi ers are
used because most motors are AC powered, but brakes require DC power.
732
G...V
Sealed RectiÀ er - Rectifi ers sealed with an electrically safe resin
732
GP...
High Performance RectiÀ er - Improves brake release and stopping times
733