NORD Drivesystems B1000 - Manual (Page 6)

www.nord.com A4
INTRODUCTION
G1000 – Subject to Change Without Notice
Company Overview
Since 1965, NORD Gear has grown to global
proportions on the strength of product performance,
superior customer service, and intelligent solutions to
a never ending variety of industrial challenges.
All mechanical and electrical components of a drive
are available from NORD Gear. Our products cover
the full range of drive equipment: helical in-line,
Clincher™ shaft-mount, helical-bevel, helical-worm
gearboxes, motors and AC drives from 1/6 hp to 250
hp, with torques from 90 lb-in to 900,000 lb-in.
But NORD Gear does far more than manufacture
the world’s fi nest drive components. We provide our
customers with optimum drive confi gurations for
their specifi c purposes, providing each and every one
of them with truly complete and effi cient systems
at a price/quality ratio unmatched in today’s fast-
changing markets.
NORD Gear makes its wide range of products easily
available through a global network that provides all
customers with prompt delivery and expert support
services to consistently exceed customer expectations.
We are fi rmly committed to being totally responsive
to the ideas and specifi cations of every customer,
anywhere in the world.
UNICASE ™
NORD heavy-duty, one-piece housings are precisely
machined to exacting standards. Internal reinforce-
ments further increase strength and rigidity. All bear-
ings and seal seats are contained within the casting,
eliminating splits or bolt-on carriers that can weaken
the housing and allow oil leakage. Bores and mount-
ing faces are machined in one step, producing ex-
tremely precise tolerances — thus ensuring accurate
positioning of gear teeth, bearings and seals, and
longer life for all components.
Benefi ts
• Leak-free design
• Quiet operation
• High output
torque
capabilities
• Extended lubrication life
• Longer gear and bearing life
• Superior dependability/low maintenance/longer life
High-Performance Motors & Brakemotors
NORD motors are designed to run cool for longer
service life. Low rotor inertia and high starting
torque allow peak performance in the most diffi cult
applications for inverter and vector duty per NEMA
MG 1-1998 Section 31.4.4.2 voltage spikes. Our
motors are internationally accepted, conforming to
North American NEMA MG 1 and international IEC
electrical specifi cations. High performance options
include brakes, encoders, and forced cooling fans.
Short, On-Time Delivery
As a NORD customer, you can rest assured that your
order will be delivered on time. Because NORD has
both decentralized assembly and manufacturing op-
erations and a linked global network, we offer our
customers:
• Fast, reliable responses
• Greater product versatility
• Shorter lead times
• Timely
shipping
• Rapid delivery
Quality
Quality is assured at NORD assembly and manufac-
turing facilities, based on ISO 9000 standards — from
careful inspection of incoming materials to closely
monitored machining operations including gear
cutting, turning, hardening & grinding as well as
fi nishing & assembly.
NORD Gear