NORD Drivesystems B1000 - Manual (Page 452)

www.nord.com D450
W + NEMA
Model Type Gear
Ratio
Output
Speed
Output
Torque* Maximum input power ”
Solid input shafts type “W“
NEMA C-Face*
Available Combinations
i
tot
n
2
T
2 max
Input Speed
1750 rpm 1750 rpm 1150 rpm 875 rpm 580 rpm
[rpm] [Ib-in] [hp] [hp] [hp] [hp] 56C 140TC 180TC 210TC 250TC 280TC 320TC 360TC
G1000 – Subject to Change Without Notice
SK 9012.1 8.09 216 1593 5.00 3.30 2.50 1.65 X X X
9.23 190 1726 5.00 3.30 2.50 1.65 X X X
10.85 161 1770 4.52 2.98 2.26 1.49 X X X*
12.23 143 1947 4.42 2.92 2.21 1.46 X X X*
15.30 114 3363 5.00 3.30 2.50 1.65 X X X
17.45 100 3363 5.00 3.30 2.50 1.65 X X X
20.87 84 3540 4.72 3.11 2.36 1.56 X X X*
24.53 71 3540 3.99 2.63 1.99 1.32 X X X*
27.65 63 3540 3.54 2.34 1.77 1.17 X X X*
31.45 56 3540 3.15 2.08 1.57 1.04 X X X*
34.81 50 3540 2.81 1.85 1.40 0.93 X X X*
41.65 42 3540 2.36 1.56 1.18 0.78 X X X*
48.95 36 3540 2.02 1.33 1.01 0.67 X X* X*
55.17 32 3540 1.80 1.19 0.90 0.59 X X* X*
62.74 28 3540 1.57 1.04 0.79 0.52 X X* X*
76.53 23 3540 1.29 0.85 0.65 0.43 X X* X*
86.00 20 3540 1.12 0.74 0.56 0.37 X X*
97.36 18 3540 1.01 0.67 0.51 0.33 X* X*
109.79 16 3540 0.90 0.59 0.45 0.30 X* X*
123.48 14 3540 0.79 0.52 0.39 0.26 X*
140.70 12 3540 0.67 0.44 0.34 0.22 X*
166.59 11 3540 0.62 0.41 0.31 0.20 X*
183.10 9.6 3540 0.54 0.36 0.27 0.18 X* X*
205.93 8.5 3540 0.48 0.32 0.24 0.16 X*
246.37 7.1 3540 0.40 0.26 0.20 0.13 X*
280.71 6.2 3540 0.35 0.23 0.17 0.11 X*
332.37 5.3 3540 0.30 0.20 0.15 0.10 X*
SK 9013.1 141.29 12 3540 0.50 0.33 0.25 0.17 X*
177.88 9.8 3540 0.50 0.33 0.25 0.17 X*
212.83 8.2 3540 0.46 0.30 0.23 0.15 X*
281.92 6.2 3540 0.35 0.23 0.17 0.11 X*
320.60 5.5 3540 0.31 0.20 0.15 0.10 X*
439.46 4.0 3540 0.22 0.15 0.11 0.07 X*
589.96 3.0 3540 0.17 0.11 0.08 0.06 X*
667.89 2.6 3540 0.15 0.10 0.07 0.05 X*
847.07 2.1 3540 0.12 0.08 0.06 0.04 X*
1256.07 1.4 3540 0.08 0.05 0.04 0.03 X*
1412.68 1.2 3540 0.07 0.04 0.03 0.02 X*
1690.10 1.0 3540 0.06 0.04 0.03 0.02 X*
W 56C 140TC 180TC
SK 9012.1 75 86 86 101
SK 9013.1 86 90 - -
SK 9012.1, SK 9013.1
NEMA-C + W
Ratings & Combinations
* Caution - The motor power may exceed the gear unit’s mechanical torque capacity
”
The mechanical power limit of the solid input shaft type “W” may limit the reducer rating.
All ratings are mechanical. See page 14 for thermal considerations.
lb