Apple Macintosh 6500 - Manual (Page 96)

Connecting to a LocalTalk Network
To connect your Macintosh to a LocalTalk network, you need LocalTalk
cables and a LocalTalk adapter. In most cases, the Apple LocalTalk Locking
Connector Kit DIN-8, available from your Apple-authorized dealer, contains
the components you need to connect your Macintosh to an existing LocalTalk
network. If your network uses standard telephone cables for your network
wiring, obtain an Apple LocalTalk RJ-11 Connector instead.
To connect your Macintosh to a LocalTalk network, do the following:
1 Shut down your computer.
2 Attach the LocalTalk adapter to the printer port or modem port on your computer.
Printer port icon
Printer port
LocalTalk adapter LocalTalk adapter
Apple LocalTalk RJ-11 Connector Apple LocalTalk Locking Connector Kit DIN-8
LocalTalk cable Standard telephone cable
96 Chapter 7