Apple Macintosh 6500 - Manual (Page 202)

1 If you have a video input card already installed in your computer and you’re going to
install a PCI card in the lower PCI slot, remove the video input card temporarily to give
yourself more room while you install the PCI card. Remove the screw from the vertical
plate that holds the video input card in place and remove the card as shown. (You’ll
reinstall the card later.)
Skip this step if there is not a video input card installed on your logic board
or if you’re installing the PCI card in the uppermost PCI slot.
2 Remove the screw that holds the port cover in place. Hold your finger under the screw to
catch it and the port cover when they come loose.
Try not to let the port cover or the screw fall onto the logic board.
Video input card If you have a video input card
installed, you may need to remove
it to give yourself room to install
a PCI card in the lower PCI slot.
Video-in slot
Screw
Vertical plate
202 Appendix B