Apple Macintosh 6500 - Manual (Page 53)

1 Assemble the speakers and the cable you need.
You need a cable with a stereo miniplug at one end to connect one or both
speakers to the computer.
Some speakers require a dual-plug adapter, which has two plugs on its end, to
plug into Audio In ports on both speakers. Others, like those shown in the
next illustration, take a single stereo miniplug and are joined by standard
speaker wires. See the documentation that came with your speakers for more
information.
2 Turn off the computer.
3 Plug the end of the cable with the stereo miniplug into the Sound output port ( - ) on
the computer.
4 Plug the other end of the cable into the speakers’ Audio In port or ports.
5 Connect the speakers together with speaker wires, if necessary.
Your finished connections should look something like this:
Audio In port
Sound
output port
Subwoofer
balance control
- Ï
Externally
powered
speakers
Stereo miniplug
53 Expanding Your Computer and Using Its Special Features