Apple Macintosh 6500 - Manual (Page 76)

76 Chapter 5
Inserting a CD-ROM disc
Follow these instructions to insert a CD-ROM disc into your CD-ROM drive.
Then follow the instructions provided with your disc, as well as the
instructions in this manual.
IMPORTANT Some CD-ROM disc labels have artwork on them that can cause
the disc’s weight to be slightly off-center when it’s rotating in the drive. This
may cause the computer to vibrate. See the next section, “If Your CD-ROM
Disc Vibrates in the CD-ROM Drive,” for more information.
1 Start up your computer, if it’s not already on.
2 Press the Open/Close button to open the tray of the CD-ROM drive.
The tray opens.
3 Place a CD-ROM disc in the tray, with the disc label facing up.
Make sure the disc is lying flat and centered in the tray.
If you are using a small (8 cm) disc, make sure the disc is centered within the
inside ring on the tray.
Open/Close button