Apple Macintosh 6500 - Manual (Page 103)

6 Attach your T-connector to the port on your card.
It may help to use two hands. With one hand, push the T-connector on the
port. While still holding the T-connector, use your other hand to twist and
lock the connector into place.
Pull the T-connector to make sure it is locked securely onto the port.
7 Start up your computer.
8 Configure your network connection following the advice of your network administrator
and the instructions in “Configuring Your Network Connection” later in this chapter.
Thin coaxial cable
(or thin coaxial
Ethernet terminator
if your computer is
the last device on
the network) Thin coaxial cable
Ethernet port (thin coaxial) T-connector
Status light (lights up when there’s a good network connection)
Thin coaxial Ethernet port (10Base-2)
103 Connecting Your Computer to a Network