West Control Solutions DataVU 7 - Manual (Page 69)

69
5 Memory Presentation (History)
The Memory presentation function can be used to display and check data
from the internal main memory (SRAM) of the instrument. The size of the
memory for memory presentation can be configured.
The memory presentation can be activated in the visualization modes “Curve
presentation” and “Binary presentation”, and is also used to display
completed batches.
Activate
memory
presentation
(History)
h In “Curve presentation” or “Digital presentation”, rotate and press the “H”
symbol to select and activate the History presentation.
A cursor is now shown in the center of the visualization window. The
corresponding measurements are shown in the line for “Numerical
measurement display”. The status and title bar shows the time corresponding
to the present cursor position, storage cycle that was used, and the scaling for
the presentation.
H
The memory presentation can only be called up if the parameter
Configuration
 Groups  Group x  Parameters  Status is set
to “Display, save” in the configuration for the group.
Event list
Scroll lines
Scroll pages
Zoom and Search
Numerical measurement
display
Channel step-on
End memory presentation
Present cursor position