West Control Solutions DataVU 7 - Manual (Page 181)

181
26 Entering text and values
Select
temperature
unit
h Select “ ” and press the control knob.
All the temperature units that can be selected will now be shown. For better
legibility, the degree sign (°) and the unit of measure (C or F) are separated,
and must be individually selected.
The selection and confirmation of the symbol is made by rotating and pressing
the control knob.
26.1.2 Insert spaces
h Select the space button (
) and press the control knob.
The space character will be inserted to the right of the cursor.
26.1.3 Delete character
h Select the delete button (
) and press the control knob.
The character to the left of the cursor will be deleted.
26.1.4 Move cursor
h Select the cursor positioning button (
) and press the control
knob.
The cursor can now be moved. To end shifting, press the control knob again.
26.1.5 Enter text from text list
The last 20 texts that were entered (confirmed by OK) will be stored in the
recorder, in an internal text list. This function can be used to call up the list and
select a text for current application.
h Call text list (
).
The selection and confirmation of the required text are made by rotating and
pressing the control knob.
26.1.6 Finish entry
h Select the “OK” button (
) and press the control knob.
Character entry will now be ended. The text that was entered is accepted, and
the dialog window is closed.