West Control Solutions DataVU 7 - Manual (Page 164)

23 Configuration – Batches/Plants
164
Batch texts How can something be edited?
Texts can be edited on the
device and with the setup
software.
- Configuration
- Batches/plants
- Gen. batch parameters
- Text of left column 1…10
- Batches/plants
- Batches/plants 1
- Batch information
- Lines 1…10
- Edit
Device:
Setup software:
If batch start, end and
duration are used, the
lines cannot be edited.
Texts can be edited on
the device and with the
setup software.
They can also be sent
to a device “online” with
the setup software.
Device:
Device
Setup software:
Setup software
(online):
-
- Configuration
- Batches/plants
- Plant 1…3
- Line 1..10
- Content of right column
and factory setting
- Visualization
- Current batch
- Select batch
- Activate editing
- Select field with
control knob
- Activate control knob
- Batches/plants
- Batches/plants 1...3
- Batch information
- Select line
- Edit
- Set up connection
Extras (tools)
- Write interface texts
- Edit texts
- Send
1
1,2
The batch number can be
permanently changed only on
the device (Parameterization menu).
It can be temporarily changed on
the device or with the setup
program. At the end of a batch,
the device-internal batch number
is incremented and reactivated.
1
1
Only available if the relevant batch parameter “Text editable” is set to Yes.
If recording of interface texts does not work, the user who is connected with the device
does not have the necessary rights.
2