West Control Solutions DataVU 7 - Manual (Page 126)

18 Configuration - Groups
126
18.1 Parameter
Overview
Status This parameter determines what happens to the group.
Name Description of the group, up to 21 characters. The description is displayed in
the individual visualization modes.
Inactive The data for the group will neither be displayed nor
stored. This setting is only available from Group 2 on. If
Group 4 or 7 is inactive, then the batch cannot be
recorded for Plant 2 or 3.
Display only The data for the group are displayed on the screen.
Display and
save The data for the group are displayed on the screen and
stored. The group data can only be evaluated from a PC
if they are stored.