beautypg.com

Service information mode, Service information – West Control Solutions ProVU 4 User Manual

Page 64

background image

ProVU4 Controller, Profiler & Recorder/Controller - Product Manual

59407, Issue 1 – March 2008

Configuration & Use

Page 63

Table 24. Product Information Screens

Product Information Mode:

Input Calibration Status

Calibration status of mVDC, VDC, mADC, RTD and Thermocouple
CJC inputs.

Caution:

Re-calibrate the unit if any inputs are not shown

as “Calibrated”.

Calibration Check Due
Date

The date re-calibration is due. – if the Calibration Reminder is enabled
in the Input Configuration menu.

Option Slot n
Information

The type of Option Modules (if any) fitted in Option Slot s 1 to 4 and A
to C.

Controller Feature
Information

Controller Only; USB Port; Data Recorder (includes USB Port) or
Profiler.

Firmware Information

The type and version of firmware installed in the instrument.

Serial Number

The instruments serial number.

Date of Manufacture

Date of Manufacture

Service Information Mode

This is a read only mode. It provides contact information to the user about where they can
obtain service, sales or technical support for the product. Normally this shows either the
manufacturer or supplier details. Using the PC software, the user can enter their own details.
There are 7 lines of text - each up to 26 characters.

Navigating Product Information Mode

There are no further screens in this mode.

Hold down

and press

to return to the Main Menu

Table 25. Service Contact Information Screen

Service Information Mode:

For Service Contact

Contact information for Service, Sales or Technical Support.