West Control Solutions ProVU 4 - Manual (Page 56)

ProVU4 Controller, Profiler & Recorder/Controller - Product Manual
59407, Issue 1 – March 2008 Configuration & Use Page 55
Clock Configuration Sub-Menu
Table 15. Internal Clock Configuration Sub-Menu Screens
Clock Configuration:
Date Format w Sets the format used for all displayed dates: dd/mm/yyyy (Day /
Month / Year) or mm/dd/yyyy (Month / Day / Year). – Recorder
versions only.
Set Date w Sets the internal clock Date. – Entered in the format defined by Date
Format screen. – Recorder versions only.
Set Day Of Week Sets the day of week used by the internal clock. – Recorder versions
only.
Set Time Sets the internal clock Time. - In hh:mm:ss (Hours : Minutes :
Seconds) format. – Recorder versions only.
Display Configuration Sub-Menu
Table 16. Display Configuration Sub-Menu Screens
Display Configuration:
Enable Custom Display
Mode Enables/disables Custom Operation Mode, if configured (requires PC
configuration software).
Read Only Operation
Mode? Allows Operation Mode to be Read-Only or Read/Write. Screens can
be seen but values cannot be changed if set to Read-Only.
Operation Mode Bar
Graph Format From: PID Power; Control Deviation or % Recorder Memory Usage.
Trend Sample Interval Interval between display of next value on the trend graph From: Every
1; 2; 5; 10; 15; 30 Seconds, or Every 1; 2; 5; 10; 15; 30 Minutes.
Select Trend Mode From: PV only, PV (solid) & SP (dotted) at sample time or Max/Min
PV between samples (candle-stick graph). Alarm activity is always
shown.
Display Colour From: Red only; Green only; Red to Green on Alarm or Green to Red
on Alarm.
Invert Display Standard or Negative display image.
Display Contrast Screen contrast (0 and 100) to improve clarity. 100 = maximum
contrast.
Language Select the main or the alternate local language. The main language is
selected at time of order. The choice of alternate language can be
changed using the PC software.