KROHNE MFC 010 C Converter - Manual (Page 86)

84
MFC010 Interface Manual
Bit Error Flag Designation
17
CT
Name
: Drive System Open Circuit
Cause
: The tube oscillation control system has detected an open circuit in
the connection the to tube drive coil.
Action :
Call service support engineer.
18
CT
Name
: Drive System Short Circuit
Cause
: The tube oscillation control system has detected an short circuit in
the connection to the tube drive coil.
Action :
Call service support engineer.
19
CT
Name
: Front End Amplifier Failure
Cause
: The measurement system has detected a failure in the motion
sensor interface circuit.
Action : Switch off the unit immediately
to prevent damage to the sensor.
This cannot be repaired in the field, the Front End electronics must be
replaced. Call a service support engineer.
20
Name
: Harmonic Distortion of Sensor A
Cause
: Not Currently Implemented
Action :
Call service support engineer
21
Name
: Harmonic Distortion of Sensor B
Cause
: Not Currently Implemented
Action :
Call service support engineer
22
CT
Name
: Watchdog Reset Event
Cause
: Not Currently Implemented
Action :
Call service support engineer
23
Name
:
Reserved for Future Use
24
Name
:
Reserved for Future Use
25
Name
:
Reserved for Future Use
26
Name
:
Reserved for Future Use
27
Name
:
Reserved for Future Use
28
Name
:
Reserved for Future Use
29
Name
:
Reserved for Future Use
30
Name
:
Reserved for Future Use
31
Name
:
Reserved for Future Use