KROHNE MFC 010 C Converter - Manual (Page 57)

MFC010 Interface Manual 55
Register No. Description
1021 Density Units
- The units setting in this register determine the scaling factor of the Density
reading and s ome other related values (see the input and holding register
definitions for details)
Format : Unsigned Integer
Range :
0 = User Defined Units ( see Section 8.7 on page 77 )
17 = g / cm 3
18 = g / dm 3
19 = g / litre
20 = g / m 3
21 = g / in 3
22 = g / ft 3
23 = g / Gallon (US)
24 = g / Gallon (Imperial)
33 = kg / cm 3
34 = kg / dm 3
35 = kg / litre
36 = kg / m 3
37 = kg / in 3
38 = kg / ft 3
39 = kg / Gallon (US)
40 = kg / Gallon (Imperial)
49 = metric Tonnes / cm 3
50 = metric Tonnes / dm 3
51 = metric Tonnes / litre
52 = metric Tonnes / m 3
53 = metric Tonnes / in 3
54 = metric Tonnes / ft 3
55 = metric Tonnes / Gallon (US)
56 = metric Tonnes / Gallon (Imperial)
65 = oz / cm 3
66 = oz / dm 3
67 = oz / litre
68 = oz / m 3
69 = oz / in 3
70 = oz / ft 3
71 = oz / Gallon (US)
72 = oz / Gallon (Imperial)
81 = lb / cm 3
82 = lb / dm 3
83 = lb / litre
84 = lb / m 3
85 = lb / in 3
86 = lb / ft 3
87 = lb / Gallon (US)
88 = lb / Gallon (Imperial)
97 = SG
Default Value : 36