Fire-Lite MS-9200UDLSC Addressable Fire Alarm Control Panel - Manual (Page 52)

52 MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014
Installation Optional Module Installation
ANN-I/O LED Driver Module
 ANN-I/O Board Layout
Figure 2.23 illustrates the ANN-I/O board showing locations of screw terminals for connection to
the FACP, pin connectors for connecting LEDs and the DIP switch for selecting the ANN-BUS ID
number.
 Specifications
• Max. ANN-BUS Voltage: 28 VDC
• Max. Current:
 Alarm: 200 mA
 Standby: 35 mA
 Each LED: 10 mA
• Operating Temperature: 32°F to 120°F (0°C to 49°C)
• For indoor use in a dry location only
Figure 2.23 ANN-I/O Board Layout
ANN-BUS (ID#)
Address DIP
switch
ANN-BUS Connector
Terminals not used (future)
a
n
n
-I
O
b
rd
.c
d
r