Fire-Lite MS-9200UDLSC Addressable Fire Alarm Control Panel - Manual (Page 21)

MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014 21
Accessories Product Description
Important: Remote modification of FACP programming requires that the panel be enabled for
remote download (refer to “Remote Site Upload/Download” on page 156). Remote interrogation
of panel programming, history logs, detector status, etc., is possible without enabling the remote
download option.
1.7.2 DP-9692 Dress Panel
An optional dress panel DP-9692 is available for the MS-9200UDLS (required by ULC for Cana-
dian installations). The dress panel restricts access to the system wiring while allowing access to
the key panel. A ground strap must be connected between the stud on the inside of the dress panel
and the ground stud in the backbox.
1.7.3 Trim Ring
An optional Trim Ring (P/N TR-CE) is available for the FACP backbox. The Trim Ring adds 1.5”
of wall coverage around the backbox, concealing hardware and providing a finished appearance for
a semi-flush mounted panel.
1.7.4 Multi-Module Mounting Bracket
An addressable Multi-Module can be installed inside the FACP backbox using the
MULTIMOD-BRKT module mounting bracket. Refer to the MULTIMOD-BRKT Installation
Document P/N 53547 for additional information.
1.7.5 Battery Box
BB-26
The BB-26 battery box may be used to house up to two 26 AH batteries and the CHG-75 Battery
Charger.
BB-55F
The BB-55F battery box may be used to house two 26 AH batteries, two 60 AH batteries or one
100 AH battery. When the CHG-120F is mounted in the BB-55F, two 26 AH or one 60 AH battery
may also be housed in the battery box.
d
p
9
2
00
ud
ls
.c
dr