Yokogawa Wireless Temperature Transmitter YTA510 - Manual (Page 5)

<1. Introduction>
1-1
IM 01C50T02-01E
1. Introduction
This manual contains a description of the YTA320
Temperature Transmitter Fieldbus Communication
Type. The Fieldbus communication type is based
on the same dual sensor input features as that
of the BRAIN or HART communication type and
is similar to the BRAIN or HART communication
type in terms of basic performance and operation.
This manual describes only those topics that
are required for operation of the Fieldbus
communication type. Refer to the user’s manual
“YTA series Temperature Transmitter [Hardware]”
(IM 01C50B01-01E) for topics common to other
communication types.
■ Regarding This Manual
• This manual should be passed on to the end
user.
• The contents of this manual are subject to
change without prior notice.
• All rights reserved. No part of this manual may
be reproduced in any form without Yokogawa’s
written permission.
• Yokogawa makes no warranty of any kind with
regard to this manual, including, but not limited
to, implied warranty of merchantability and
fitness for a particular purpose.
• If any question arises or errors are found, or if
any information is missing from this manual,
please inform the nearest Yokogawa sales
office.
• The specifications covered by this manual are
limited to those for the standard type under the
specified model number break-down and do not
cover custom-made instrument.
• Please note that changes in the specifications,
construction, or component parts of the
instrument may not immediately be reflected
in this manual at the time of change, provided
that postponement of revisions will not cause
difficulty to the user from a functional or
performance standpoint.
• The following safety symbol marks are used in
this Manual:
WARNING
Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious
injury.
CAUTION
Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate
injury. It may also be used to alert against unsafe
practices.
IMPORTANT
Indicates that operating the hardware or software
in this manner may damage it or lead to system
failure.
NOTE
Draws attention to information essential for
understanding the operation and features.