Yokogawa Wireless Temperature Transmitter YTA510 - Manual (Page 46)

<8. Handling Caution>
8-6
IM 01C50T02-01E
(2) Electrical Connection
The type of electrical connection is stamped near
the electrical connection port according to the
following marking.
T0801.ai
F0805.ai
Location of the marking
(3) Installation
WARNING
All wiring shall comply with local installation
requirement and local electrical code.
(4) Operation
WARNING
• OPEN CIRCUIT BEFORE REMOVING
COVER. INSTALL IN ACCORDANCE WITH
THIS USER’S MANUAL
• Take care not to generate mechanical
sparking when access to the instrument and
peripheral devices in hazardous locations.
(5) Maintenance and Repair
WARNING
The instrument modification or parts replacement
by other than authorized Representative of
Yokogawa Electric Corporation is prohibited and
will void the certification.
(6) Name Plate
Name plate for intrinsically safe type
Name plate for flameproof type
F0806.ai
Name plate for intrinsically safe type Ex ic
TEMPERATURE
TRANSMITTER
YTA MODEL
SUFFIX
STYLE
SUPPLY
NO.
OUTPUT
CAL
RNG
*3
TEMPERATURE
TRANSMITTER
YTA MODEL
SUFFIX
STYLE
SUPPLY
NO.
OUTPUT
CAL
RNG
*3
TEMPERATURE
TRANSMITTER
YTA MODEL
SUFFIX
STYLE
SUPPLY
NO.
OUTPUT
CAL
RNG
MODEL: Specified model code.
SUFFIX: Specified suffix code.
STYLE: Style code.
SUPPLY: Supply voltage.
NO.: Serial number and year of production *1 .
OUTPUT: Output signal.
FACTORY CAL: Specified calibration range.
TOKYO 180-8750 JAPAN:
The manufacturer name and the address *2 .