IEI Integration NANO-945GSE v1.01 - Manual (Page 25)

NANO-945GSE EPIC Motherboard
Page 5
1 x PCI-104 slot
1 x PCIe Mini Card slot
2 x Serial ATA (SATA) drive connectors
2 x RS-232 serial port connectors
1 x RS-232/422/485 serial port connector
1 x TV Out connector
2 x USB 2.0 connectors (supports four USB 2.0 devices)
The NANO-945GSE has the following external peripheral interface connectors on the
board rear panel.
2 x Ethernet connectors
1 x PS/2 connector
1 x Serial port connector
2 x USB connectors
1 x VGA connector
The NANO-945GSE has the following on-board jumpers:
AT Power Mode Setting
Clear CMOS
CF card setup
LVDS1 Voltage Selection
LVDS1 and LVDS2 Panel Resolution Selection
LVDS2 Voltage Selection
COM2 Port Mode setting
PC104+ VIO Selector
1.2.3 Technical Specifications
NANO-945GSE technical specifications are listed in
747H791H
Table 1-1. See Chapter 2 for details.
Specification NANO-945GSE
Form Factor EPIC
System CPU 45 nm 1.6 GHz Intel® Atom™ N270