IEI Integration NANO-945GSE v1.01 - Manual (Page 121)

NANO-945GSE EPIC Motherboard
Page 101
Step 3: Insert the cable connectors . Once the cable connector is properly aligned with
the 26-pin box-header connector on the PCIE-9452, connect the cable
connector to the on-board connector. See
914H
Figure 5-20.
Figure 5-20: LPT Cable Connection
Step 4: Attach the LPT connector to the chassis. To secure the LPT interface
connector to the chassis please refer to the installation instructions that came
with the chassis.
Step 5: Connect LPT device. Once the LPT interface connector is connected to the
chassis, the LPT device can be connected to the LPT interface connector. See
915H
Figure 5-21 Step 0:\