Vanguard DigiTMR S2 User Manual

Page 95

REV 1 DIGITMR S2 USER’S MANUAL

1. COPY SINGLE RECORD

Press the

[1]

key (COPY SINGLE RECORD) to copy a single test record from the unit’s

Flash EEPROM to the connected USB Flash drive. The following screen will be
displayed:

Type the record number using the keypad and then press the

[ENTER]

key. The

selected test record will be copied to the USB Flash drive and the following screen
will be displayed:

Press any key to return to the “START-UP” menu.

2. COPY ALL RECORDS

Press the

[2]

key (COPY ALL RECORDS) to copy all test records from the unit’s Flash

EEPROM to the connected USB Flash drive. All test records will be copied and the
following screen will be displayed when the process is finished:

Press any key to return to the “START-UP” menu.

ALL RECORDS HAVE BEEN
TRANSFERRED TO THUMB
DRIVE!

REC_001 SAVED TO
THUMB DRIVE.

ENTER RECORD NUMBER
TO COPY TO FLASH DRV

NUMBER: