Vanguard DigiTMR S2 - Manual (Page 49)

REV 1 DIGITMR S2 USER’S MANUAL
44
1. AUTOMATIC PRINT
Press the
[1]
key (AUTOMATIC PRINT) if you would like reports to be printed
automatically after each test. The setting will be saved and you will be returned
to the “START-UP” menu.
2. BY REQUEST ONLY
Press the
[2]
key (BY REQUEST ONLY) if you do not want test reports to be
printed automatically after each test. The setting will be saved and you will be
returned to the “START-UP” menu. Please see section 3.9 for information on
how to print test shots.