Vanguard DigiTMR S2 - Manual (Page 70)

DIGITMR S2 USER’S MANUAL REV 1
65
3.9 Printing Test Results
After a timing test has been performed, the test results can be printed in graphical or tabulated
format on the DigiTMR S2’s built-in thermal printer.
3.9.1. Printing the Tabulated Test Results
To print the tabulated test results from the last test performed:
a. Start from the “START-UP” menu:
Press the [2] key (GET RESULTS) to get the last test results.
b. The following screen will be displayed:
Press the [1] key (PRINT TEST RESULTS).
c. The following screen will be displayed:
Press the [1] key (THERMAL PRINTER).
SELECT PRINTER
1. THERMAL PRINTER
2. DISPLAY RESULTS
1. PRINT TEST RESULTS
2. PLOT FULL CHART
3. PLOT EXPANSION
4. PLOT 0 - 200MS
1. TIME BREAKER
2. GET RESULTS
3. SETUP
4. DIAGNOSTICS