Vanguard DigiTMR S2 - Manual (Page 45)

REV 1 DIGITMR S2 USER’S MANUAL
40
h. The following screen will be displayed:
Type the circuit breaker’s serial number using the keypad and then press the
[ENTER]
key.
i. The following screen will be displayed:
Type the operator’s name using the keypad and then press the [ENTER] key. All
header information will be saved, and you will be returned to the “START-UP” menu.
OPERATOR:
_
↑
/
↓
TO POSITION
"ENTER" TO ACCEPT
SERIAL NUMBER:
_
↑
/
↓
TO POSITION
"ENTER" TO ACCEPT