Vanguard DigiTMR S2 - Manual (Page 92)

DIGITMR S2 USER’S MANUAL REV 1
87
Press any key to return to the “START-UP” menu.
e. The following screen will be displayed:
1. ERASE SINGLE SHOT
Press the [1] key (ERASE SINGLE SHOT) to erase a single test shot from the unit’s
Flash EEPROM. The following screen will be displayed:
Type the record number that you would like to erase and then press the [ENTER]
key. If you do not know the record number, you can first print a record directory
(please see section 3.10.2). The following confirmation screen will be displayed:
Press the [ENTER] key to confirm the deletion of the selected record (you can
press the [STOP] key to cancel the process). The test record will be erased and the
following screen will be displayed:
ERASE SHOT # 2
TEST: OPEN
DATE: 07/09/12 08:18
"ENTER" TO CONFIRM
ENTER SHOT NUMBER
TO BE ERASED
_
"ENTER" TO CONFIRM
1. ERASE SINGLE SHOT
2. ERASE ALL SHOTS!
ALL THUMB DRIVE
RECORDS ERASED!