Vanguard DigiTMR S2 User Manual

Page 83

Text mode
Original mode

REV 1 DIGITMR S2 USER’S MANUAL

3.10.2. Printing

Timing Shot Directory

A listing of all the shots stored in the DigiTMR S2’s EEPROM or on a connected Flash drive can
be printed on the built-in thermal printer using the steps below:

a. Start from the “START-UP” menu:

Press the

[3]

key (SETUP).

b. The following screen will be displayed:

Press the

[3]

key (SAVE / RESTORE).

c. The following screen will be displayed:

Press the

[3]

key (SHOT DIRECTORY).

If a USB Flash drive is connected to the unit, continue to step d.

If a USB Flash drive is NOT connected to the unit, continue to step e.

d. The following screen will be displayed:

1. INTERNAL DIRECTORY
2. THUMB DRIVE DIR

1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
5. COPY TO THUMB DRIVE

1. ANALYSIS POINTS
2. MEASUREMENT UNITS
3. SAVE / RESTORE
4. SHOT DESCRIPTION
5. NEXT PAGE

1. TIME BREAKER
2. GET RESULTS
3. SETUP
4. DIAGNOSTICS