Vanguard DigiTMR S2 User Manual

Page 62

DIGITMR S2 USER’S MANUAL

REV 1

e. The following screen will be displayed:

Press the

[5]

key (O-C-O) to select the OPEN-CLOSE-OPEN timing operation.

f. The following screen will be displayed:

Using the keypad, enter the delay time (in milliseconds) between the OPEN-CLOSE
operation, and then press the

[ENTER]

key.

g. The following screen will be displayed:

Using the keypad, enter the delay time (in milliseconds) between the CLOSE-OPEN
operation, and then press the

[ENTER]

key.

h. The following screen will be displayed:

Press and hold down the

[ARM]

switch, and then press the

[START]

key. Continue to

hold down the

[ARM]

switch.

HOLD "ARM" UNTIL
TEST COMPLETES

"START" TO BEGIN
"STOP" TO ABORT

C-O DELAY in MS:

(10 - 350)

MSEC

"ENTER" WHEN DONE

O-C DELAY in MS:

(10 - 350)

MSEC

"ENTER" WHEN DONE

TIMING MODE:

1. OPEN 2. CLOSE
3. O-C 4. C-O
5. O-C-O