Vanguard DigiTMR S2 - Manual (Page 81)

REV 1 DIGITMR S2 USER’S MANUAL
76
d. The following screen will be displayed:
Press the [ENTER] key to continue.
If a USB Flash drive is connected to the unit, continue to step e.
If a USB Flash drive is NOT connected to the unit, continue to step f.
e. The following screen will be displayed:
1. SAVE INTERNALLY
Press the [1] key (SAVE INTERNALLY) to save the test record to the unit’s Flash
EEPROM. Continue to step f.
2. SAVE TO THUMB DRIVE
Press the [2] key (SAVE TO THUMB DRIVE) to save the test record to the
connected USB Flash drive. The following screen will be displayed while the test
shot is being saved:
SAVE IN PROGRESS
PLEASE WAIT
1. SAVE INTERNALLY
2. SAVE TO THUMB DRIVE
SAVE SHOT # 3
TEST: OPEN
DATE: 07/12/12 13:25
"ENTER" TO PROCEED