Vanguard DigiTMR S2 - Manual (Page 16)

DIGITMR S2 USER’S MANUAL REV 1
11
f. Launch the VCBA S2 application. From the “Sys-Config” menu, select “System Setup…”.
The following window will be displayed:
Make sure that the “Enable USB” option is UN-checked. Then, from the “Port” drop-
down menu, select the COM port that corresponds to the port that the DigiTMR S2 is
connected to. Then click the OK button. The VCBA S2 software will now recognize the
DigiTMR S2.