Vanguard DigiTMR S2 User Manual

Page 87

REV 1 DIGITMR S2 USER’S MANUAL

d. The following screen will be displayed:

1. INTERNAL STORAGE

Press the

[1]

key (INTERNAL STORAGE) to restore a test shot from the unit’s internal

Flash EEPROM. Continue to step e.

2. THUMB DRIVE

Press the

[2]

key (THUMB DRIVE) to restore a test shot from a connected USB Flash

drive. The following screen will be displayed:

Type the record number using the keypad and then press the

[ENTER]

key. If you

do not know the record number, you can first print a test shot directory (see section
3.10.2). After the test shot has been restored to the working memory, the following
screen will be displayed:

Press the

[1]

key (YES) if you would like to print the restored test record. The test

record will be printed and you will be returned to the “START-UP” menu. The
restored record will remain in the working memory.

Press the

[2]

key (NO) if you do not want to print the test record. You will be

returned to the “START-UP” menu. The restored record will remain in the working
memory.

REC_001 RESTORED!
PRINT RECORD?
1.YES
2.NO

RESTORE THUMB DRIVE

REC_

1.INTERNAL STORAGE
2.THUMB DRIVE