Vanguard DigiTMR S2 User Manual

Page 94

DIGITMR S2 USER’S MANUAL

REV 1

3.10.5.

Copying Test Shots to a USB Flash Drive

Use the steps below to copy one or all test records from the unit’s Flash EEPROM to a
connected USB Flash drive:

a. Make sure a USB Flash drive is connected to the unit’s “USB MEM” port, and then start

from the “START-UP” menu:

Press the

[3]

key (SETUP).

b. The following screen will be displayed:

Press the

[3]

key (SAVE / RESTORE).

c. The following screen will be displayed:

Press the

[5]

key (COPY TO THUMB DRIVE).

d. The following screen will be displayed:

COPY REC TO THUMB DRV

1. COPY SINGLE RECORD
2. COPY ALL RECORDS

1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
5. COPY TO THUMB DRIVE

1. ANALYSIS POINTS
2. MEASUREMENT UNITS
3. SAVE / RESTORE
4. SHOT DESCRIPTION
5. NEXT PAGE

1. TIME BREAKER
2. GET RESULTS
3. SETUP
4. DIAGNOSTICS