Vanguard DigiTMR S2 - Manual (Page 80)

DIGITMR S2 USER’S MANUAL REV 1
75
3.10 Working with Timing Shots
3.10.1. Saving Timing Shots
After performing a test, the test shot can be saved in the DigiTMR’s EEPROM or to a connected
USB Flash drive by using the steps below:
a. Start from the “START-UP” menu:
Press the [3] key (SETUP).
b. The following screen will be displayed:
Press the [3] key (SAVE / RESTORE).
c. The following screen will be displayed:
NOTE
Option 5 (COPY TO THUMB DRIVE) will be listed only if a USB Flash drive is
connected to the DigiTMR S2.
Press the [1] key (SAVE SHOT).
1. SAVE SHOT
2. RESTORE SHOT
3. SHOT DIRECTORY
4. ERASE SHOT
5. COPY TO THUMB DRIVE
1. ANALYSIS POINTS
2. MEASUREMENT UNITS
3. SAVE / RESTORE
4. SHOT DESCRIPTION
5. NEXT PAGE
1. TIME BREAKER
2. GET RESULTS
3. SETUP
4. DIAGNOSTICS