Vanguard DigiTMR S2 User Manual

Page 90

DIGITMR S2 USER’S MANUAL

REV 1

d. The following screen will be displayed:

1. ERASE INTERNAL REC

Press the

[1]

key (ERASE INTERNAL REC) if you would like to erase test records that

are stored in the unit’s internal Flash EEPROM. Continue to step e.

2. ERASE THUMB DRV REC

Press the

[2]

key (ERASE THUMB DRV REC) if you would like to erase test records

that are stored on a connected USB Flash drive. The following screen will be
displayed:

1. ERASE SINGLE REC

Press the

[1]

key (ERASE SINGLE REC) to erase a single record from the USB Flash

drive. The following screen will be displayed:

Type the record number that you would like to erase and then press the

[ENTER]

key. If you do not know the record number, you can first print a

record directory (please see section 3.10.2). The selected record will be erased
and the following screen will be displayed:

ERASE THUMB DRIVE

REC_

ERASE RECORD

1. ERASE SINGLE REC
2. ERASE ALL RECORDS

"STOP" TO EXIT

1. ERASE INTERNAL REC
2. ERASE THUMB DRV REC