Vanguard DigiTMR S2 User Manual

Page 51

REV 1 DIGITMR S2 USER’S MANUAL

3.7

Performing Timing Tests

3.7.1. Timing an OPEN Operation With No Insertion Resistors

To time an OPEN operation with no insertion resistors:

e. Start from the “START-UP” menu:

Press the

[1]

key (TIME BREAKER) to start a test.

If a previous test shot is in the DigiTMR S2’s memory, the following screen will be
displayed:

1. SAVE SHOT

If you would like to save the previous shot in memory, press the

[1]

key (SAVE

SHOT). The following screen will be displayed:

Press the [ENTER] key. The following screen will be displayed:

Once the record is saved, the following screen will be displayed:

1. TIME BREAKER
2. GET RESULTS
3. SETUP
4. DIAGNOSTICS

SAVE IN PROGRESS

PLEASE WAIT

SAVE SHOT # 2
TEST: OPEN
DATE: 07/09/12 08:18

"ENTER" TO PROCEED

PREV SHOT NOT SAVED

1. SAVE SHOT
2. CONTINUE (NO SAVE)